Gas Fitting & Gas Appliances
Adding a gas range, hooking up a dryer, running a line to the deck, or smelling gas? Our licensed gas fitters handle it safely and to code across Winnipeg — the same crew that does your plumbing and heating.
Gas work done safely, done to code.
Gas is not a DIY job. A bad fitting or an unpermitted line is a safety risk and an insurance problem. We're licensed gas fitters — every hookup, line, and appliance install is done properly, pressure-tested, and inspection-ready.
Because we're plumbers and heating techs too, we handle the whole picture — the gas line, the venting, and the water side of an appliance — with one crew and one number.
If you smell gas, get everyone out and call Manitoba's gas emergency line first. Then call us for the repair. We run a 24-hour line.
(204) 586-3719 Request a QuoteWhen you need a licensed gas fitter.
Some jobs you can't put off, and none of them should be done without a licence. Here's when to call.
A rotten-egg smell means leave now and call the emergency line. Then call us to find and fix the source.
New range, dryer, or fireplace? The gas line has to be sized, run, and tested by a licensed fitter.
Recurring pilot or ignition faults on gas appliances point to a valve or thermocouple issue.
A healthy gas flame is crisp blue. Yellow or flickering can mean incomplete combustion — get it checked.
Unpermitted or aging lines are a safety and insurance risk. We inspect, correct, and certify.
BBQs, fire tables, and heaters need a properly run and permitted line — done right, buried right.
If it runs on gas, we can connect it.
Not sure if your appliance needs a fitter? Ask us — most do.
Safe, tested hookups for gas stoves and cooktops, new or replacement.
Gas dryer connections done to code, with the venting checked too.
Gas fireplace and insert hookups, plus venting handled by our crew.
BBQs, fire tables, and patio heaters on a permitted, buried line.
From your call to a certified connection.
Call or send a quote request with the appliance and where the line needs to go.
A licensed gas fitter sizes the line, pulls the permit, and books the work.
Run the line, connect the appliance, pressure-test, and leave it inspection-ready.
Gas fitting questions, answered.
While we're there.
Need gas work done right?
Tell us the appliance or the line you need, or just call the shop. You'll get a licensed gas fitter and a straight quote.